Unitronix - Products Page - Avionics Databus


Home Products Email Us Info Database Who We Are Suppliers Contact Us
Products Page - Avionics Databus

The following page gives Engineers an insight into the latest tools and capabilities offered by AIM GmbH, for test, simulation, analysis and emulation of avionics data buses. AIM products are utilised in ground based test equipment and ATE rigs around the world. As such AIM is considered the leader in the 1553 technology market and especially in the new Avionics Ethernet and Fibre channel topologies for aircraft systems.

As of August 2011 there is no longer need for an Export License to ship our MIL-STD-1553A/B products for Test and Simulation Applications from Germany. There is still, however, the need for an export licence for embedded applications with military temperature range, radiation hardening, etc.

Nginuity ARINC-429 Converter Modules
Nginuity AP9113 ARINC-429 to USB Converter
Nginuity AP9116 ARINC-429 Automated Voice Alerting
Nginuity AP9120 ARINC-429 to MIL-STD1553-B Converter
Nginuity IP5010 ARINC-429 to NMEA-0183 Converter
Nginuity IP5011 ARINC-429 to RS232 Converter
Nginuity CP7036 ARINC-429 to USB Avionics Interface
Click Here to view Nginuity's Shortform Catalogue

Nginuity AP-SERIES

AP9112 Barometric Potentionmeter Switching Unit
AP9113 ARINC-429 to USB Converter Module
AP9114 ARINC-429 to Encoded Altitude Converter Module
AP9115 CDSR Autopilot Interface Module
AP9116 Automated Voice Alerting Device (AVAD)
AP9117 PED Power Supply Module
AP9118 ARINC-407 (Synchro) to ARINC-429 Converter Module
AP9119 Discrete Interface Module
AP9120 ARINC-429 <-> MIL-STD-1553B Converter Module
AP9121 CDSR Fuel Flow Interface Module
AP9125 Laptop Power Supply Module
AP9130 ARINC-429 Data Rate Converter Module
AP9131 MIL-STD-1553 to RS-232 Converter Module
AP9132 Airborne Data Processor Module
AP9135 GPS / Inertial Sensor Module

Nginuity IP-SERIES

IP5010 ARINC-429 to NMEA-0183 Converter Module
IP5011 ARINC-429 to RS-232 Converter Module
IP5012 ARINC-429 to Analog Converter Module
IP5013 ARINC-429 to Discrete Converter Module
IP5014 ARINC-429 to CAN 2.0B Converter Module
IP5015 Power Supply Module 8W Single / Dual Output

Nginuity CP-SERIES

CP7026 ARINC-429 to USB Converter Module
CP7027 ARINC-407 to USB Converter Module (Reader)
CP7028 ARINC-407 to USB Converter Module (Generator)
CP7029 Encoded Altitude to USB Converter Module (Reader)
CP7030 Encoded Altitude to USB Converter Module (Generator)
CP7031 Discrete Signal to USB Converter Module (Reader)
CP7032 Discrete Signal to USB Converter Module (Generator)
CP7034 ARINC-429 to USB Converter Module (R2,T2)
CP7035 RS-422 (MODBUS) to USB Converter Module (R1,T1)
CP7036 ARINC-429 to USB Avionics Interface Module (Multi Protocol)
CP7039 Nano429 ARINC-429 to USB Converter Module

Nginuity Instrumentation

DPM7010 Digital Pressure Module

Nginuity Specials

P7000 12 Channel 2 Pole Multiplexer Board
CP7021 ARINC-429 / Encoded Altitude / Analogue Buffer Board
CP7018 RS-485 / ETHERNET to GPIB / USB Converter Module

PDF Datasheets are not available for our full range of Nginuity products, for further information please contact UNITRONIX on
61-2-4977-3511

AIM MIL-STD 1553 - Test and Simulation Modules:

AIM AMC-1553-x:
The AMC1553 family of PCI Mezzanine (PMC) modules provide full function test, simulation, monitoring and Databus analyser functions for MIL-STD-1553A/B applications. One, two or four independent dual redundant MIL-STD-1553A/B Databus streams are provided on the multi-channel AMC1553-x modules. An onboard, sinusoidal, IRIG-B time code encoder/decoder allows users to accurately synchronize multiple modules to a common time source. The AMC1553-x modules use two high performance RISC processors, each of them supporting one dual-channel Bus Interface Unit (BIU 2 ), each implementing two independent MIL-STD-1553A/B Channels.

PDF Datasheet

AIM AP104-1553-x:
The AP104-1553-x is a member of AIM’s new family of advanced PC/104-Plus bus modules targeted to embedded MIL-STD-1553A/B applications. The AP104-1553-x Full Function version concurrently act as the bus controller, multiple remote terminals (31) and chronological/mailbox bus monitor. Versions with reduced set of functionality (Single Function or Simulator Only) are available as well as extended temperature range variants. All AP104-1553-x cards have the capability to handle eight General Purpose Discrete I/O (GPIO) signals and also offer Trigger I/O.

PDF Datasheet

AIM AEC1553-x:
Single and dual-stream ExpressCard for MIL-STD-1553 Test & Simulation. The AEC1553-x offers full function test, simulation, monitoring & recording for MIL-STD-1553 applications.

PDF Datasheet

AIM APM1553:
MIL-STD-1553 Test & Simulation Module for PC-Card (PCMCIA, Type II) with 1 Dual Redundant Channel plus 8 Programmable Discrete Inputs/Outputs. Robust & Low Power Design with Rugged (screw-locked) SCSI-III connector.

PDF Datasheet

AIM ACX1553-x:
The AXC1553 is a member of AIM’s new family of PCI Express based XMC-Mezzanine (ANSI/ VITA 42.3) modules targeted to embedded MIL-STD-1553A/B applications. The AXC1553-x full function version concurrently acts as Bus Controller, Multiple Remote Terminals (31) and Chronological/ Mailbox Bus Monitor. Versions with reduced functionality (Single Function or Simulator Only) are available as well as extended temperature range variants. All AXC1553-x cards have the capability to handle eight General Purpose Discrete I/O (GPIO) signals and also offer Trigger-I/O.

PDF Datasheet

AIM ACX1553-3U-x:
The ACX1553-3U-x is a member of AIM’s new fourth generation family of advanced cPCI/ PXI (3U) bus modules for analysing, simulating, monitoring and testing MIL-STD-1553A/B databuses. The ACX1553-3U-x modules concurrently act as the bus controller, multiple remote terminals (31) and chronological/mailbox bus monitor. The ACX1553-3U-1/2-DS version known as MILScope TM , has an onboard A/D Converter on the first MIL-STD-1553 channel. The MILScope option provides a unique capability to test & verify the MIL-STD-1553 waveform and detect faulty bus conditions without the need of an external Oscilloscope.

PDF Datasheet

AIM AVX1553-x:
The AVX1553-1/2/4/8 is a member of AIM’s new (fourth generation) family of advanced VME bus modules for analysing, simulating, monitoring and testing MIL-STD-1553A/B databuses. The AVX1553-x modules concurrently act as the bus controller, multiple remote terminals (31) and chronological bus monitor/mailbox monitor. The AVX1553-1/2-DS version known as MILScope™, has an on-board A/D converter on the first MIL-STD-1553A/B channel. The MILScope™, option provides a unique capability to test & verify the MIL-STD-1553A/B waveform and detect faulty bus conditions without the need of an external Oscilloscope.

PDF Datasheet

AIM MILScope™:
The AIM MILScope™ provides the unique capability to test & verify MIL-STD-1553 waveforms and detect faulty bus conditions without the need of an external Oscilloscope. The MILScope™capability is integrated into the design of the new PCI/ PCI-X based APX1553-1-DS/-2- DS test & simulation modules on one MIL-STD-1553 channel. Each has a two channel differential analogue to digital converter (ADC) providing 50Msamples for primary & secondary bus data acquisition or 100Msamples for either the primary or the secondary bus This capability is provided above and beyond that of the standard functions & features of the APX1553 cards (bus controller, multiple remote terminal, chronological monitor, physical bus reply - see APX1553 datasheet for full technical specifications). This enhanced capability provides users with accurate measurements of physical bus parameters such as rise and fall time, overshoot, undershoot, pulse width and signal amplitude.

PDF Datasheet

AIM FOL1553-P:
FOL1553-P is a portable, fibre optic link extension system designed for MIL-STD-1553 bus stubs. Comprising of a two part system, it has been designed for applications where the distance from a UUT (Unit Under Test) has to be extended for EMC testing or remote monitoring. Two types of FOL-P's are available. The SIMULTOR system extends the bus stub up to 100 metres and the MONITOR system up to 500 metres.

PDF Datasheet

AIM ARINC-825 - CANBus Test and Simulation Modules:

AIM AMC825-4:
The AMC825-4 PCI Mezzanine Card (PMC) can work either with full functionality as an active CAN node for testing and simulating or in ‘listening only’ mode for monitoring and recording purposes of Avionic CAN bus (ARINC825) applications on up to four electrically isolated CAN bus nodes concurrently. All nodes are in conformance with the ISO11898-1/-2 standard. They are accessible by software separately and can be used as four independent CAN bus nodes. An onboard IRIG-B time decoder allows users to accurately synchronise single or multiple modules to a common time source.

PDF Datasheet

AIM AVC825:
The AVC-2 is a single slot, double height (6U) VME64x, extended VMEbus module with two separate PMC slots. The AVC-2 uses an on board, industry standard, Tundra chip (Universe II) providing the bridge between the VMEbus and PCIbus. The AVC-2 fulfils the requirements of the VME64x extension plus the Interface for rear I/O. Each PMC-slot is in conformance with the draft standard physical and environmental layers for PCI Mezzanine Cards (P1386.1/Draft 2.4).

PDF Datasheet

AIM AFDX/ARINC-664 - Test and Simulation Modules:

AIM AMC-FDX-2:
The AMC-FDX-2 is AIM’s new ultra high performance intelligent PMC (PCIbus Mezzanine Card) module offering full function test, simulation, monitoring and analyser functions for AFDX (Avionics Full Duplex Switched Ethernet) networks. It’s unique on board processing capability, memory resources, customised AFDX MACs and IRIG-B time code decoder/generator gives AFDX users unparalled features for the most demanding AFDX applications. The AMC-FDX-2 PMC module provides two AFDX ports being configured as two single or one dual redundant ports each implementing a 100Mbit full duplex ethernet interface.

PDF Datasheet

AIM API-FDX-2:
The API-FDX-2 is AIM’s new ultra high performance intelligent PCI (PCIbus Mezzanine Card) module offering full function test, simulation, monitoring and analyser functions for AFDX (Avionics Full Duplex Switched Ethernet) networks. It’s unique on board processing capability, memory resources, customised AFDX MACs and IRIG-B time code decoder/ generator gives AFDX users unparalled features for the most demanding AFDX applications. The API-FDX-2 PCI module provides two AFDX ports being configured as two single or one dual redundant ports each implementing a 10/100Mbit full duplex ethernet interface.

PDF Datasheet

AIM APM-FDX-2/B:
AFDX/ARINC664 test & simulation module for PC-Card (PCMCIA, Type II) with 2 full duplex ports programmable for 100Mbit/s or 10Mbit/s. Versions available for both Airbus and Boeing variants of ARINC664.

PDF Datasheet

AIM APU-FDX-2:
USB module for AFDX/ARINC664 test & simulation with 2 full duplex ports programmable for 10/100Mbit. Versions available for both Airbus & Boeing variants of ARINC664.

PDF Datasheet

AIM ARINC-429 - Test and Simulation Modules:
	AIM AMC429: The AMC429 family of PCI Mezzanine (PMC) modules offer full function test, simulation, monitoring and databus analyser capabilities for ARINC429 applications on up to 32 channels concurrently. Conduction Cooled (CC) Modules are also available for the AMC429 family. The AMC429 CC modules meet the ANSI/VITA 20-2001(R2005) standard. PDF Datasheet

AIM AP104-429-x:
The AP104-429-x is a member of AIM’s new family of advanced PC/104-Plus modules targeted to embedded ARINC429 applications. The AP104-429-x offers full function test, simulation, monitoring and databus analyser capabilities for ARINC429 applications on up to 16 channels concurrently. Four channels are available on the AP104-429-4, eight channels on the AP104-429-8 and sixteen channels on the AP104-429-16 module. Extended temperature range variants are available as well.

PDF Datasheet

AIM ACX429-3U-x:
The ACX429-3U-x is a member of AIM’s new fourth generation of advanced cPCI/ PXI (3U) modules for analysing, simulating, monitoring and testing of ARINC429 channels providing up to 16 channels on a 3U cPCI/ PXI standard module format. Four channels are available on the ACX429-3U-4, eight channels on the ACX429-3U-8 and sixteen channels on the ACX429-3U-16 module. All channels are software programmable for Receive (Rx) or Transmit (Tx) mode.

PDF Datasheet

AIM APM429:
ARINC429 test & simulation module for PC-Card (PCMCIA, Type II) with 4 (2Tx/2Rx), 8 (4Tx/4Rx) & 16 (8Tx/8Rx) channels plus 8 discrete I/O's.

PDF Datasheet

AIM APU429:
USB Module for ARINC429 Test & Simulation with 4 (2Tx/2Rx), 8 (4Tx/4Rx) & 16 (8Tx/8Rx) Channels plus up to 8 bi-directional Discrete I/O's.

PDF Datasheet

Nginuity Avionics ARINC-429 Converter Modules:

Nginuity AP9113 Arinc-429 to USB Converter:
The AP9113 ARINC-429 TO USB / NMEA Converter Module, is a 28VDC powered ruggedised protocol converter module, comprising of 2 ARINC-429 input channels, 2 USB output channels and a discrete status output. The AP9113 can acquire flight data parameters from up to 2 ARINC-429 sources, process and re-format the data and upload to the USB interface for use with navigational chart plotting software (NMEA). In addition to the NMEA data stream, a secondary binary data stream is available to 3rd party software applications for bespoke display and data logging applications.
PDF Datasheet

Nginuity AP9120 ARINC-429 to MIL-STD-1553 Converter:
The AP9120 ARINC-429 <-> MIL-STD-1553B Converter, is a +28V DC powered bi-directional protocol converter module. The AP9120 provides 4 channels of ARINC-429 TX, 4 channels of ARINC-429 RX, a MIL-STD-1553B dual redundant terminal (BC/RT/BM modes), 3 discrete inputs, 3 discrete outputs, 6 RT address select inputs and a discrete status output. The AP9120 is a generic protocol converter providing uni-directional or bi-directional data conversion between the MIL-STD-1553B military data bus and ARINC-429 commercial data bus for a variety of applications.
PDF Datasheet

Nginuity IP5010 ARINC to NMEA Converter Module:
The IP5010 ARINC-429 TO NMEA Converter Module, is a 28VDC powered ruggedised protocol converter module, comprising of 1 ARINC-429 input channel and 1 RS-232 output channel. The IP5010 can acquire data parameters from a single ARINC-429 source, process and re-format the data and output on an RS-232 interface for use with navigational chart plotting software (NMEA). The IP5010 ARINC-429 input channel can be configured for High speed (100KHz) or Low speed (12.5KHz) operation, and the resulting NMEA output baud rate can be configured for either 4800, 9600 or 19200 operation.
PDF Datasheet

Nginuity CP7036 ARINC-429 to USB Avionics Interface Module:
The latest generation in our established range of successful ARINC to USB converter modules, the CP7036 family now provides enhanced functionality and software capabilities. The CP7036 Avionics Interface Module allows easy acquisition and display of Avionic bus data. CP7036 has a standard Universal Serial Bus(USB) giving quick and simple installation and set up with any laptop or desktop computer. The product range converts ARINC-429 to USB across all products and adds the ability to convert ARINC-561, ARINC-568, ARINC-575 with the higher end products. ARINC-419 mode (24 bit), is also available as standard.
PDF Datasheet

AIM Analyser Software:

AIM PBA Pro Software:
PBA.pro is the new generation of Avionics Databus Test and Analysis software using a modular, scalable and integrated approach for use with AIM's family of high performance test and simulation modules. PBA.pro is a powerful yet cost effective software system covering a wide range of applications from a stand alone databus analyzer to a complete systems test bench or advanced avionics integration facility. AIM provides complete Databus Analyzer solutions integrating the required modules, analyser software & PC platform to meet your specific requirements.

Click the links below for a PDF Datasheet

PBA Pro

PBA Pro-MIL

PBA Pro-ARINC-429

PBA Pro-AFDX

PBA Pro-TSM

PBA Pro-DBM

Testplan Software:

AIM Testplan Software:
AIM’s PBA.pro-SCR-PTP-P dedicated scripting package is designed to run the MIL-STD-1553 ‘Protocol Tests’ in accordance with the ‘SAE AS4112’ Remote Terminal Production Test Plan. This package requires the use of AIM’s MIL-STD-1553 test& simulation cards and the PBA.pro™ Databus Analyser & Analysis Software. The PBA.pro-SCR-PTP-P comprises a set of test scripts and user panels, which fully automate the ‘Protocol Test’ requirements. The dedicated test panel has been created using the PBA.pro designer component and the scripts executed and managed by the PBA.pro test & script manager component.

AIM Cables and Accessories:
	AIM offers a variety of custom and off the shelf cables, bus couplers, terminators and accessories for use with their modules and Databus Analysers. For more information please contact UNITRONIX on 61-2-49773511

AIM System Solutions:

Using AIM’s Avionics modules and Databus Analyser/ParaView software plus industry standard, COTS hardware and software components as building blocks, Unitronix delivers complete system solutions.

AIM's flagship System is the High Level Databus Analyzer (HLBA) which can simulate, monitor, display, control and record parameters from multiple MIL-STD-1553/STANAG3910 buses and ARINC429/AFDX channels simultaneously!

Multi Stream, networked based high level Databus Analysers (HLBA)
Ruggedised Aircraft Ground Equipment (AGE)
Special to Type Test Equipment (STTE)
Real time data acquisition, display and processing systems (PADS and DAS)
MIL-STD-1760 test Sets (WTS)
Fibre Optical, MIL-STD-1553 Bus/Stub Extension Systems (FOMIS)
RT Tester - AFDX communication, test, analysis & simulation station

For further information on system solutions from AIM, please contact UNITRONIX on 61-2-49773511

UNITRONIX Pty Ltd
ABN 79 006 226 115
PO Box 486 Morisset NSW Australia
www.unitronix.com.au - sales@unitronix.com.au
NSW - Ph: 61-2-4977-3511 - Fax: 61-2-4977-3522
WA - Ph: 61-8-9455-2424 - Fax: 61-8-9455-2458