Products Page - Peripheral Interface and I/O Cards - PC/104
|
|---|
| Home Products Email Us Info Database Who We Are Suppliers Contact Us |
|
Products Page - Peripheral Interface and I/O Cards - PC/104 |
GET Serial D Main Features:
|
 |
 |
GET Serial E Main Features:
|
| 1553: | |
 |
AIM AP104-1553-x: The AP104-1553-x is a member of AIM’s new family of advanced PC/104-Plus bus modules targeted to embedded MIL-STD-1553A/B applications. The AP104-1553-x Full Function version concurrently act as the Bus Controller, Multiple Remote Terminals (31) and Chronological/ Mailbox Bus Monitor. Versions with reduced set of functionality (Single Function or Simulator Only) are available as well as extended temperature range variants. All AP104-1553-x cards have the capability to handle eight General Purpose Discrete I/O (GPIO) signals and also offer Trigger I/O.  PDF Datasheet |
| Analogue to Digital (A to D) & Digital to Analogue (D to A): | |
 |
General Standards' PC/104+ 24DSI16WRC: The 16-channel 24DSI16WRC analogue input module provides high-density 24-bit analogue input resources on a standard single-width PMC. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms. PDF Datasheet |
| General Standards' PC/104+ 16HSDI4AO4: The 16-Bit PC/104+16HSDI4AO4 analogue I/O module uses sigma-delta A/D conversion to sample and digitise four input channels simultaneously at rates up to 1.0 million samples per second for each channel. The resulting 16-bit sampled data is available to the PCI bus through a 256K-Sample FIFO buffer. Sampling can be controlled in groups of 1 through 4 channels, and the sample clock can be generated from an internal rate generator, or through software, or by external hardware. PDF Datasheet |
 |
 |
General Standards PC104+ 18AO8: The PC104+18AO8 is a precision 18-Bit analogue output product that provides eight simultaneously clocked output channels. Outputs can be clocked at rates up to 500 KSPS per channel, and are supported by a 256K-Sample FIFO data buffer. Both continuous and burst clocking modes are supported, and voltage ranges are software-selectable as ±10V, ±5V or ±2.5V. Clocking and triggering rates can be derived from an internal rate generator, or from external clock and trigger sources to support the synchronous operation of multiple boards. PDF Datasheet |
Sensoray 518: |
 |
 |
Sensoray 526: |
| Fast Serial Ports: | |
 |
General Standards' PC/104+ SI04BX: The PC/104+ SI04BX board is a four channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability for PMC applications. The SIO4BX combines two multi-protocol Dual Universal Serial Controllers (USC®), 8 external FIFOs, and multi-protocol transceivers to provide four fully independent asynchronous or synchronous serial channels. Multiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28), V.35, RS530, as well as other Mixed Protocol modes. PDF Datasheet |
| General Standards' PC104+ HPDI32A-ASYNC: The PC104P-HPDI32A-ASYNC is a full-duplex RS-422/485 serial I/ O board. Each channel can operate up to 5M bits/ s. FIFO buffers up to 512K-byte for both transmit and receive (1M byte total) provides for a smooth and efficient interface between the serial interfaces and the host computer. The high speed async transmit/receive is implemented in an FPGA and provides for protocol flexibility. It features a full duplex DMA interface. PDF Datasheet |
|
| Ethernet: | |
 |
VersaLogic PCM-3660: |
| Digital I/O: | |
 |
General Standards' HPDI32A: The PC104P-HPDI32A board is a fast and flexible bi-directional 32-bit digital I/ O board that transmits and receives data up to 80 Mbytes (differential I/ O) or up to 200 Mbytes (Pseudo ECL I/ O) per second. The board is use-ful as a general-purpose DMA interface to a variety of external peripherals. The DMA engine is capable of transferring data to/from Host memory using D32 block transfers, while the FIFO memory (up to One Mbyte of total FIFO) provides continuous transmission of data without interrupting the DMA transfers or requiring intervention from the Host CPU. PDF Datasheet |
| General Standards' PC104+ OPTO32A: The PC104P-OPTO32A board has 32 optically-coupled digital I/ O channels consisting of 8 outputs and 24 inputs. Each channel is electrically isolated (1000 Volts) from the PC104 host processor board. Change-of-State Interrupts allow for an interrupt to the PC104 host to be generated from any level change on any input. Built-in-self-test, selectable debounce times, input pulse counter, and I/ O voltages to 50 Volts makes for a versatile digital interface board. The board is a single PC104 board, which complies with the PC104 electrical interface IEEEO 1386.1. PDF Datasheet |
|
| Video/VGA & Graphics Boards: | |
 |
Sensoray 311: |
| Sensoray 314: Model 314 is a low-cost MPEG-4/2/1 and MJPEG frame grabber that captures full-frame (720 x 480) video at 30 frames per second. Uncompressed video is available through the PC/104+ bus for previewing. It also has two synchronized audio input channels and on screen display of text (OSD). MPEG and MJPEG data reduces the amount of memory required to store full motion video.MPEG and MJPEG data reduces the amount of memory required to store full motion video. The compressed data requires a smaller transmission bandwidth. MJPEG data is typically compressed by a factor 20 while MPEG-2 and -4 by a factor of 100. Image compression makes it possible to transmit 30 frames/sec of MPEG video over the PC/104+ bus. Link to Sensoray's Website |
 |
VersaLogic Tiger: The Tiger is an embedded single board computer (SBC) featuring a high-performance Intel Atom Z5xx processor. Based on the PC/104-Plus industry standard form factor, the Tiger supports both PC/104 and PC/104-Plus stackable expansion boards. With its combination of high performance (up to 1.6 GHz), low power consumption (6W typ. while executing code), and fanless operation, the Tiger is an ideal embedded computer solution for space, weight, and power (SWaP) constrained embedded applications in industrial, energy, defense/aerospace, medical, and robotics markets. PDF Datasheet NEW! |
 |
 |
VersaLogic Leopard: The Leopard is an embedded computer featuring an Intel 2nd generation Core 2 Duo processor. Based on the PC/104-Plus industry standard form factor, the Leopard supports PCI and ISA stackable expansion buses on a 4.21” by 3.78” footprint. With its combination of ultra-high performance (up to 2.26 GHz), mid-range power consumption (21.3W typ.), ruggedness, and compact size, the Leopard is an ideal embedded computer solution for medical, security, defense, transportation, and industrial markets. Potential applications include flight navigation, guidance systems, and evolving applications that rely on fast on-board processing of large amounts of data. PDF Datasheet |
VersaLogic Cheetah: |
 |
 |
Acrosser AR-B1622: AMD LX800 500MHz processor AMD LX800 + CS5536 chipset 200MHz DDR SDRAM up to 1GB AMD Geode integrated video cont. up to 254MB shared system memory PDF Datasheet |
 |
Acrosser AR-B8020: RDC R8610 486 133MHz proc. RDC R8610 chipset Onboard 64MB SDRAM memory 10/100Mbps LAN ethernet controller PDF Datasheet |
The Evoc 104-1649CLD2NA: AMD LX600/800 366/500MHz CPU Onboard 512MB DDR2 memory Supports VGA/LVDS/TTL It supports 2x10/100Mbps Ethernet interface, 4 x USB2.0,4 x COM and an operating temperature of -40°C -85°C  PDF Data Sheet |
 |
The Evoc 104-1811CLDNA: Atom™ N270 1.6G/533MHz CPU with 1G DDR2 memory. It supports VGA/LVDS, 1 x 10/ 100/1000 Mbps, Ethernet interface, 2 x USB2.0,4 x COM and an operating Temperature :of -40°C~85°C PDF Data Sheet |
 |
| Expansion Products: | |
 |
VersaLogic USB Expansion for SUMIT: |
|
|
|
|
UNITRONIX
Pty Ltd  |
