Products Page - VME, VXS, VPX, cPCI & AMC Embedded SBC & I/O
|
|---|
| Home Products Email Us Info Database Who We Are Suppliers Contact Us |
|
Products Page - VME, VXS, VPX, cPCI & AMC Embedded SBC & I/O |
There is a wide range of products available from Unitronix in VME/VXS/VPX form factor, with multiple levels of ruggadisation for survival in different environmental conditions, from naval benign to full military spec. The following pages show a selection of the latest products from the suppliers that Unitronix represents in Australia and New Zealand. If your requirements fall outside of what is shown here please contact us on, Tel: +61 2 4977 3511. We are only too pleased to provide technical support and product advice. To recieve PDF Datasheets of the products which do not have a link on this page, please contact UNITRONIX on 61-2-49773511 |
| Single Board Computers: | |
 |
Curtiss Wright CHAMP-AV8: The CHAMP-AV8 multi-processing board brings the floating-point performance of the quad-core Intel® Core TM i7-2715QE processor to the OpenVPX form factor standard. Utilizing a pair of processors, the CHAMP-AV8 delivers performance rated at up to 269 GFLOPs. With a 21GB/s (peak) DDR3 memory subsystem connected directly to the processor, the Intel® Core TM i7-2715QE is able to maximize the throughput of its Intel AVX vector processing units and process larger vectors at peak rates significantly greater than was possible with previous AltiVec™-based systems.  PDF Data Sheet |
Curtiss Wright SVME/DMV-194: |
 |
 |
Curtiss Wright SVME/DMV-1905: |
Curtiss Wright VPX6-187: Curtiss-Wright's VPX6-187 combines the advanced performance and the advanced I/O capabilities of the Freescale’s QorIQ P4080 communications processor with extensive I/O complement to provide the most advanced processing platform for use in wide range of embedded military/aerospace applications. PDF Data Sheet |
 |
 |
Curtiss Wright VPX6-1956: The VPX6-1956 from Curtiss- Wright Controls Embedded Computing supports Intel® Core™ i7 Quad-Core 32nm processor with Intel AVX floating point libraries. Utilizing this advanced quad-core CPU and Curtiss-Wright’s proven ruggedization technology, the VPX6-1956 is designed for high performance operation in harsh environments. With a 21 GB/s (peak) DDR3 memory subsystem connected directly to the processor, the Intel Quad-Core 32nm device is able to maximize the throughput of the Intel AVX floating point units. PDF Data Sheet |
 |
Curtiss Wright VPX3-1256: The VPX3-1256 from Curtiss-Wright Controls Embedded Computing supports the Intel® Core™ i7 quad-core processor with Intel AVX floating-point libraries. Utilizing this advanced quad-core CPU and Curtiss-Wright’s proven ruggedization technology, the VPX3-1256 is designed for high-performance operation in harsh environments. With a 21 GB/s (peak) DDR3 memory subsystem connected directly to the processor, the Intel Core i7 is able to maximize the throughput of the Intel AVX floating-point units. PDF Data Sheet |
Curtiss Wright VPX6-185: |
|
 |
Curtiss Wright CHAMP-AV5: The CHAMP-AV5 multi-processing board brings the floating-point performance of the Intel® Core i7™ architecture to VME64x form factor standard. Utilizing a pair of 2.53GHz dual-core Core i7 processors, the CHAMP-AV5 delivers up to 81 GFLOPs of performance. The 17GB/s (peak) DDR3 memory subsystem supports applications with high memory utilization and streaming data I/O. PDF Data Sheet |
 |
Concurrent TechnologiesTR 80x/39x: The TR 80x/39x features the enhanced processing and graphics performance of the quad-core Intel® Core™ i7-2715QE processor and the dual-core Intel® Core™ i5-2515E processor whilst maintaining the power consumption of the previous Intel® Core™ processors. Applications for the TR 80x/39 are expected in real-time, military embedded, aerospace and transportation systems for data acquisition, control systems and video signal processing. PDF Data Sheet |
| Concurrent Technologies VX 81x/09x: The VX 81x/09x is a 6U VXS Single Board Computer fully compliant with the VITA 41.x standard. Users will benefit from the enhanced processing and graphics performance of the quad-core Intel® Core™ i7-2715QE processor or the dual-core Intel® Core i5-2515E processor.Additionally the board supports up to 16Gbyte of ECC DDR3 SDRAM, configurable PCI Express® fabric interface supporting 1 x8, 2 x4, 1 x4 + 1 x4 at Gen 1 or Gen 2 data rates, dual Gigabit Ethernet, dual SATA600, dual PMC / XMC slots, dual serial RS232/422/485 ports, 6 USB 2.0 ports, dual independent display ports, on-board CompactFlash™ and optional 2.5 inch hard drive. PDF Data Sheet |
 |
 |
Concurrent Technologies PP 712/08x: The PP 712/08x family of 6U CompactPCI® boards, one of the first embedded product ranges to feature the Intel® Core™ i7 processor family, released by Intel®. Depending on the application requirements a choice of processors are supported: the 2.53GHz Intel® Core™ i7-610E, 2.0GHz Intel® Core™ i7- 620LE and the 1.06GHz Intel® Core™ i7-620UE. Based on 32nm process technology and the new Intel® integrated memory/graphics controller architecture, these processors are from the Intel® embedded roadmap which offers at least seven year availability. PDF Data Sheet |
| Concurrent Technologies TR A40/30x RC: Leading edge ultra low power 3U VPX-REDI single board computer (SBC), the TR A40/30x RC, designed to comply with the OpenVPX VITA 65 standard. The TR A40/30x RC utilizes the 1.6 GHz Intel® Atom™ processor Z530 and the highly integrated Intel® System Controller Hub US15W both from the Intel® embedded roadmap, ensuring long term availability. PDF Data Sheet |
 |
 |
Concurrent Technologies AM 210/x0x: Concurrent Technologies announce their latest high performance Advanced Mezzanine Card (AdvancedMC®) single width, mid-height or full-height, processor module suitable for AdvancedTCA®, MicroTCA. The AM 210/x0x features the Intel® Core™2 Duo processor operating at 2.26 GHz or 1.86 GHz and supports up to 8 Gbytes DDR3-1066 SDRAM. PDF Data Sheet |
| Concurrent Technologies VX
407: Concurrent VX 407 Core 2 Duo 2.16/ 1.5GHz SBC compatable with VME64x or VXS 41.3 backplanes. Upto 4GB DDR2 DRAM, USB 2.0, serial, graphics, EIDE/SATA150, PMC site, optional on board disk drive and Compact FLASH, optional PMC carrier. PDF Data Sheet |
 |
 |
Concurrent Technologies VP
417: Concurrent VP 417 Core 2 Duo 2.16/ 1.5GHz VME 64x SBC. Upto 4GBytes DDR2 EEC DRAM, 2 x XMC sites (x8 and x4 PCIe) or 2 x PMC sites (32/64bit 100/133MHz), 2 x GB Ethernet, 2 x USB 2.0, 2 x serial, EIDE/SATA150, Graphics. VITA 31.1 GB Ethernet, optional PMC carrier. Optional on board disk drive and Compact FLASH, optional PMC carrier. PDF Data Sheet |
| Concurrent Technologies VP
426: Concurrent VP 426 Dual 1.66GHz Dual-Core Xeon processors. Upto 8 GB DDR2 ECC DRAM, 2 x GB Ethernet, graphics, SATA150/ EIDE, 1 x PMC site (32/64-bit, 66MHz) or 1 x XMC site (x8 PCIe). Optional on board disk drive and Compact FLASH, optional PMC carrier. VITA 31.1 GB Etherent on backplane. VME64 and VE320 92eSSt) support. PDF Data Sheet |
 |
 |
Concurrent Technologies VP 317: Concurrent VP 317 Pentium-M processor operating at 1.2GHz. 1 GB DDR DRAM soldered down. 2 x PMC sites (32/64-bit, 33/66MHz), 2 x GB Ethernet, graphics, 2 x USB 2.0, up to 3 x serial. EIDE/SATA150. VITA 31.1 GB Ethernet. I/O compatible with new VP 417. PDF Data Sheet |
Themis XV1: Themis Computer’s XV1™ is a new 6U VMEbus computer based on the Intel® Quad-Core L5408 Xeon® processor and the Intel 5100 chipset used in high performance Xeon servers. The XV1 provides high-performance and is designed to meet the needs of customers who require quad-core performance for their demanding applications. Themis' new XV1boards are ideal for compute-intensive embedded, storage and communications applications as well as a wide range of commercial and military applications. PDF Data Sheet |
 |
 |
Themis LV1: Themis Computer’s LV1™ is a new 6U VMEbus computer based on the Intel® Core™ 2 Duo processor. Operating system support includes Solaris™ 10 as well as Windows® and Linux®. The LV1 is designed for customers who require the low-power Intel Core 2 Duo processor to provide efficiency and high performance for their demanding applications. The LV1 single slot configuration enables workstation levels of performance in a VME form-factor. The LV-1 and its two-slot XMC expansion board are fully RoHS compliant. PDF Data Sheet
|
| Themis T2VPX: The T2VPX is the first of Themis' new family of VITA-46 and VITA-65 compliant, VPX board-level-computers. Themis' T2VPX provides customers with next generation processing performance and high bandwidth serial switched fabrics.The T2VPX™ board is the industry's first 6U board level computer based on the Sun® Microsystems UltraSPARC® T2 processor, continuing Themis' legacy of bringing the Solaris™ Operating System to demanding applications.Based on the Sun UltraSPARC® T2 CMT (chip multi-threading) processor, the industry's first "system on a chip", the T2VPX is offered with 6 and 8 core processor options. PDF Data Sheet |
 |
| Switches and Routers: |
 |
CurtissWright VPX6-684: Enabling the vision of inter-networked heterogeneous military and aerospace systems in the Global Information Grid (GIG), CWCEC's VPX6-684 FireBlade provides Systems Integrators with a fast, secure and unified approach to interconnect subsystems, chassis, cards, and compute nodes within any given platform using 1 Gigabit Ethernet links. Providing up to 24 wirespeed 10/100/1000 Mbps interfaces and up to 4 10Gbps interfaces in a single 6U VPX slot, the 684 is ideal for architecting system-wide Intra-Platform Networks (IPNs). The VPX6-684 comes with a powerful set of management interfaces and complete layer 2/3 software with dual IPv4/v6 support for building secure, high performance networks. PDF Data Sheet
|
| CurtissWright VPX3-685: The VPX3-685 is a fully featured L2/L3 managed Ethernet router with a highly integrated security sub-system. Enabling the vision of Network Centric connectivity, Curtiss-Wright Controls Embedded Computing's VPX3-685 Secure FireBlade switch/router provides an accelerated path to ‘secure network ready’ architectures that can interoperate seamlessly within the Global Information Grid (GIG). PDF Data Sheet
|
 |
| Input/Output Cards | |
 |
NAI VME 64EP3: The 64EP3 is a single slot, 6U VME Single Board Computer (SBC) with configurable multi-function I/O. Powered by a choice of Freescale’s 1.25 GHz MPC8536 PowerPC (U3) or Analog Devices’ low-power 500 MHz BF533 (U2) processor, the 64EP3 offers an elegant SBC solution for today’s demanding, space constrained and resource limited embedded systems. Four I/O module slots enable integrators to mix-and-match a variety of I/O and communication functions. PDF Data Sheet |
| NAI OpenVPX 67C3: The 67C3 is a single slot 6U OpenVPX (0.8” pitch) multi-function I/O and serial communications card. With VME, Gigabit Ethernet (Gig-E) and High Speed sRIO or PCIe control interface selections, users can confidently choose to take advantage of the OpenVPX form-factor offering higher speed switched fabric communication options. The motherboard contains six independent module slots, each of which can be populated with a function-specific module, and can now be controlled by the VME, Gig-E and sRIO or PCIe. PDF Data Sheet |
 |
 |
NAI Model VME 64D2: The 64D2 is a 6U VME Multifunction Communications and Digital I/O Board with local Processing capability. The “mother board” contains 3 independent slots, each of which can be populated with a function specific module. Additionally, Slot 3 can be populated with a DSP processor. This unique design eliminates the need for specialized, single function boards required for system integration by providing a combination of communication and digital I/O functions on one board. All I/O data written to or read from the board can be managed over the Ethernet port or via the VMEBus. PDF Data Sheet |
| NAI 64C2: The 64C2 is a second generation multi-function card which adds Ethernet capability, offers additional programmability, and faster operating speed. It is a universal Multifunction VME I/O Board that eliminates the complexity and size constraints of using multiple, independent, single-function cards. The 64C2 contains 6 module positions, each of which can include the functions of A/D (10-channels), D/A (10-channels), Discrete I/O (16-channels), TTL I/O (16-channels), Differential Multi-Mode Transceivers (11-channels), RTD (6-channels), Synchro/Resolver (4-channels), LVDT/RVDT (4-channels), and Signal Generator (4-channels). Both air-cooled and conduction-cooled versions are available.  Multiple functions on a single slot VME card. User can specify six different function modules. Automatic Background BIT testing continually checks and reports the
health of each Ch. Control via either VME or Ethernet. Designed for both Commercial and MIL applications. Connections via Front panel, Rear panel, or both. Conduction or Convection cooled versions. No damage if signals are applied when card is not powered. Software support kit and drivers are available. PDF Data Sheet |
| NAI 64D1: The 64D1 is a 3-module, Multifunction, 6U VME Communications Board. It eliminates the complexity and size constraints of using multiple, independent, single-function cards. The 64D1 can include any three combinations of the following: 6 channels of Synchronous or Asynchronous RS-232C/RS-422/RS-485, 2 channels of Dual Redundant MIL-STD-1553 BC/RT/MT, 8 channels of Profi-bus, 48 channels of Discrete I/O or 48 channels of TTL I/O. Both air-cooled and conduction-cooled versions are available. Features automatic background BIT testing that identifies and reports a failure during operation, without the need to shut down the equipment for troubleshooting. No damage if signals are applied when card is not powered. Geographical addressing (Field selectable). Connections via Front panel, P2/P0 or both. Conforms to ANSI/VITA 1.1-1997 VME64 extension and VITA 1-1999. VxWorks Driver available PDF Data Sheet |
 |
| Power Supply Products: |
| North Atlantic Industries Rugged Power Supply Products: NAI offers a variety of Conduction Cooled, COTS and Custom 6U VME /cPCI/ VPX AC/DC Rugged Power Supplies specifically designed for the Rugged, Military and Commercial Aerospace markets. Output power up to 600 Watts is available. NAI AC/DC Military Power Supplies provide high power-density, low profile, high reliability, and rugged packaging. Advanced designs accept a wide range of inputs and provide standard VME and cPCI output configurations. All AC/DC Military Power Supplies are designed with NAVMAT component derating and have integrated EMI filters per MIL-STD-461 Click on one of the links below for a PDF Data Sheet  230 Watt Power Supply300 Watt Power Supply430 Watt Power Supply |
      |
| Chassis, Peripherals and Test: | |
| Dawn CCE-3VX4: Small and extremely rugged, cold plate base coupled, conduction cooled enclosure measures 7"L x 6"W x 7.62H. Full environmental sealing insures reliable operation in any environment. Embedded RuSH Technology monitors Power Supply voltage and current on all VS(n) and AUX rails, plus temperature, and (optionally) humidity. Flexible backplane fabric and I/O mapping supports any application. Backplane is configurable to meet any data plane connection fabric. PDF Data Sheet |
 |
| DAWN
EXB-9515: 6U VME64x J1J2 Test Extender Board. ANSI/VITA 1997-1 Compliant. Signal, power and ground pins per the VME64x specification. Any and all J1 and J2 signal lines are switch interruptible. Optional fused power feed to the extender DUT board. Accommodation for logic analyzer test probes before and after interrupt switches. High-quality inject/eject card guide handles included. PDF Data Sheet |
 |
| DAWN
DEV-4113: 8-Slot VME64x Tabletop Development Chassis, featuring a IEEE1101.10 compatible front card cage and matching 6UX80MM rear transition module card cage. Assembled with an 8-slot VME64x backplane, with shrouds on P0 and P2 connectors, a push-pull DC fan system, single 500W power supply, Dawn's RuSH system health monitor with display, removable side plates, front mounted main power switch. PDF Data Sheet |
 |
| DAWN
DEV-4114: 8-Slot VITA41 (VXS) Tabletop Development Chassis, featuring a IEEE1101.10 compatible front card cage and matching 6UX80MM rear transition module card cage. Assembled with an 8-slot VITA41 backplane, with 1 payload and 7 system slots, a push-pull DC fan system, single 500W power supply, Dawn's RuSH system health monitor with display, removable side plates, front mounted main power switch. PDF Data Sheet |
| NAI
Model DC/DC 57S81 PSU: The 57S81 is a high power-density, low profile, 500 watt AC/DC and DC/DC Power Supply with up to 8 outputs for VME/VXI and general purpose applications. It accepts both 270 VDC and 115/230 VAC (single phase) inputs and provides full output power at +85°C baseplate temperature. PDF Data Sheet |
 |
| VME Mass Storage Solutions: | |
| Red
Rock VME Mass Storage: Choose from a variety of mass storage modules designed for use in a wide range of industrial and military applications. Removable, secure, fast field replacement, securable data storage and high density mass storage within the card cage are just a few of the benefits provided by our pluggable modules. PDF Data Sheet |
 |
| Single Board Computers: |
| Curtiss Wright SVME/DMV-186 PowerPC QorIQ P4080: VME-186 is the most advanced VME SBC harnessing the power and performance of Freescale's QorIQ P4080 Communications Processor. The P4080 has eight Power Architecture™ processor cores and associated high-performance data-path acceleration logic, network and peripheral bus interfaces provide the ultimate platform for a wide range of embedded harsh environment applications. PDF Datasheet |
 |
 |
Curtiss Wright VPX3-1252 3U VPX Intel Core2 Duo: VPX3-1252 combines the performance and the advanced I/O capabilities of Intel Core2 Duo SP9300 processor and Intel GM45S Chipset with an extensive I/O complement to provide a highly capable processing platform for a wide range of embedded rugged applications. Designed for space constrained applications, the VPX3-1252 represents the latest step in the evolution of rugged high performance, highly integrated small form factor SBCs. PDF Datasheet |
| SVME/DMV-184 Curtiss-Wright's 184, 8641 processor provides tremendous data bandwidth to and from memory via dual 64-bit DDR2 memory controllers and to the PCIe/PCI hierarchy through two independent 8-lane PCIe ports. Along with one high-performance PMC site, there is one XMC-capable mezzanine site with an 8-lane PCIe port allowing for multi-GB/sec data rates between the XMC site and on-board memory. A rich I/O complement including three 1GB Ethernet ports and options for multi-function RS-232/422/485 serial ports, MIL-STD-1553, SCSI, Serial ATA, and TTL and differential discretes. PDF Datasheet |
 |
 |
SVME/DMV-183 Curtiss-Wright's 183, using single or dual Freescale MPC7447A/7448 PowerPC™ processors with AltiVec™ technology and up to 2 GB of state-of-the-art DDR SDRAM, the SVME/DMV-183 represents the latest advancement in functionality and performance for rugged SBC. With two 64-bit PMC sites, one supporting 100 MHz PCI-X, and an innovative complement of I/O capability such as GB Ethernet, up to six serial ports, up to two 1553 channels, SCSI, Serial ATA, and two USB 2.0 ports. PDF Datasheet |
| VP
347 Concurrent VP 347 Pentium-M 1.8GHz, 1.6GHz or 1.4GHz, option for 1.0GHz Celeron M Ultra Low Voltage processor. Upto 2 Gbytes DDR DRAM, 2 x GB Ethernet, 4 x USB 2.0, 2 x serial. Ultra Wide SCSI/EIDE/Floppy disk controller. Graphics, PMC site, optional on board disk drive or Compact FLASH, optional PMC carrier. PDF Datasheet |
 |
 |
AD
CR3/PMC Concurrent AD CR3/PMC. VME based PMC carrier card, supports 2 PMC modules, 33/66MHz and 32/14bit. 3.3V support, front and rear I/O signals. PDF Datasheet |
| Chassis, Peripherals and Test |
| Silicon
Control- VME64x Bus Analyser The VME850 Analyzer / Exerciser supports the latest VME bus specifications and protocols. From standard VME transfers to 2eSST protocol. In addition to the VME bus, user defined signals on the P0 and P2 connectors are also analyzed and exercised with optional plug-in modules. VXS analyser coming in 2008. PDF Datasheet |
 |
| Workstation Server Class Processing Boards |
 |
USP
IIIi Themis' Work Station Class Single Board Computers (SBCs) are designed to address the needs of the largest segments of the embedded marketplace - the federal systems, aerospace and communications markets. Themis' VMEBus SBCs feature processors from AMD®, Intel®, P.A. Semi, and Sun® Microsystems. They are compatible with Linux®, Windows®, VxWorks®, LynxOS®, and the Sun? Solaris™ Operating Environment. Themis' SBCs allow users to access thousands of off-the-shelf software solutions required for today's diverse and demanding applications. PDF Datasheet |
|
|
|
|
UNITRONIX
Pty Ltd  |
